Three Years in a School Bag: A PA12 Gecko | Better Basics
The most honest durability test we have ever come across did not take place in a testing laboratory, but in a child’s bedroom and a school bag.
A consultant whose expertise we greatly value sent us photographs of a little gecko that we produced from polyamide 12 using selective laser sintering (SLS) 3D printing – the very same material used for the green plastic components of our SmartRack®.
For three years, this gecko was part of everyday life in a child’s bedroom, experiencing everything that comes with it: being played with, dropped, stepped on and misplaced. Over the past six months, the school bag became its new home, squeezed between a lunchbox, pencil case and PE kit, buried beneath heavy textbooks and carried through many a crowded bus journey.
Today, the gecko bears the marks of its adventures. Two little feet have been lost along the way, but it is still going strong. And we think that is a remarkably good result after three and a half years of life with a child.
Our consultant, Jan Hubrig, knows laboratories from almost every perspective: as a long-standing laboratory manager and head of analytical services, through his involvement in technical and standardisation committees, and as a technical assessor for the accreditation of testing laboratories.
The fact that someone with this background chose to share this little discovery and its photographs with us is something we take as a particular compliment. After all, he knows exactly what matters when assessing the performance of a material.
We frequently receive enquiries about material resistance, and our answer is always the same: it depends on the substance involved, the duration of exposure and the stresses applied.
A child’s bedroom and school bag are certainly not a standardised testing procedure, nor can they replace a technical data sheet. But they provide a wonderfully tangible demonstration of what PA12 can withstand mechanically in everyday life. And compared with the adventures of a child’s favourite toy, everyday laboratory conditions are relatively civilised.
For everything that life in a child’s bedroom cannot demonstrate, we have reliable technical evidence.
In long-term artificial weathering tests conducted in accordance with ISO 11507, our coloured PA12 components show no significant loss of colour intensity. They are resistant to commonly used laboratory solvents, including ethanol, acetone, dichloromethane and toluene, and are fully autoclavable.
We are equally transparent about the material’s limitations, for example when exposed to concentrated acids or prolonged chemical contact. These are clearly documented in the chemical resistance overview on our website.
Alongside all the standardised tests, it is sometimes worth looking at real life: the data sheet provides the technical evidence, while the gecko brings it to life.
Do you have any questions about the chemical resistance or durability of specific components when exposed to particular substances? We would be delighted to hear from you at anfrage@better-basics.de.
#LaboratorySupplies #SmartRack #LeanLab #Polyamide12 #3DPrinting #LaboratoryEquipment